Pro-face PL-6930-T41, Руководство пользователя

Страница: 117 / 175

PL-6930 / PL-7930 Series User Manual
6-4
6.1.2 Setting Up an HDD with Pre-installed OS
Use the following steps to set up your PL unit’s HDD unit, which contains the operating system of Win-
dows
®
2000 or Windows
®
XP, related drivers and utility software.
„
Installing the HDD Unit
After opening the PL unit’s packing box, check that a hard disk unit is installed. If it is not, install an HDD
unit with the pre-installed OS. For the installation method, refer to the Installation Guide that comes with the
HDD unit with the pre-installed OS.
„
Setting Up the PL Unit’s System Information
If your PL unit does not have a pre-installed HDD, you will need to install an HDD unit with the pre-installed
OS and then configure that drive’s system information. Be sure to check that the system successfully recog-
nizes the drive. For detailed setup procedures about the hard disk, refer to the Installation Guide that comes
with the HDD unit with the pre-installed OS.
• Each pre-installed operating system on the hard disk in the PL unit is designed specially for the
PL-6930/PL-7930 Series.