Pro-face PL-6930-T41, Руководство пользователя

Страница: 110 / 175

Chapter 5 System Setup
5-31
5.2.5 Boot
Specifies an order for boot-up devices. The boot-up devices are specified in the Boot priority order list and are
searched for from the top of the list in sequence. By using the [+] or [-] keys, change its order. To change the
device to be booted up, use the [x] key to move the device from the Boot priority order list to the Excluded
from boot order list and vice versa.
Boot priority order
Specifies the order of the boot-up devices. The factory default settings are as follows:
1: IDE 0 : Primary Master Device
2: IDE 1 : Primary Slave Device
3: IDE 2 : Secondary Master Device
4: IDE 3 : Secondary Slave Device
5: USB FDC : USB Floppy Disk Driver
6: USB CDROM : USB CDROM Driver
7: USB HDD : USB Memory, etc.
8:
• When a new hard disk or commercial USB memory which does not require boot-up is connected
and such a device is given high priority in the Boot priority order list, the system may not boot up
properly. Be sure to check the order of the devices in the Boot priority order list after you con-
nect a new device.