-11-
1) Unscrew the expansion slot's
two (2) blank panel screws,
and remove the blank panel.
Since the HDD unit is a precision instrument that has a low resis-
tance to shocks, be sure it is neither hit by nor pressed strongly
against another object when installing it.
Installation
2
Use the following steps to install the HDD unit in the PL.
WARNINGS
Shock Danger! Be sure to unplug the PL unit from its power
supply prior to installing the HDD unit.
WARNING
2) Hold the HDD unit's removal
handle and slide the unit slowly
into the expansion slot, until the
rear face connector is completely
inserted into the slot's connector
pins.
When installing an HDD unit
in other Expansion Slots, use
the above installation proce-
dures.
3) Reattach the two (2) expansion
slot cover attachment screws.