15/45
3.2 Preparation
Requirements for
receiving screen data
from GP-37W2
*1
PC in which GP-PRO/PBIII for Windows V4.0 or later is
installed.
*2
Transfer cable
(The following three types of cables are available)
・
GPW-CB02 (D-sub 9-pin to the PC)
・
GPW-CB03 (USB to the PC)
*3
・
GP430-CU02-M or GPW-SET (D-sub 25-pin to PC)
Requirements for
converting screen data
of GP-37W2 and
transferring the
converted data to
GP-4301TW
PC in which GP-Pro EX Ver.3.0 or later is installed.
An USB data-transfer cable
(The following three types of cables are available.)
・
An USB transfer cable (model: CA3-USBCB-01)
・
An USB data-transfer cable (model: ZC9USCBMB1)
・
An commercial USB cable (USB Type A/mini B)
* Possible to send/receive a screen with an USB flash drive
or via Ethernet.
*1:
This step is required if screen data is saved only in the GP unit, not in any other device.
*2:
Please use the same version or later as or than that of the software used during creating screens on
GP-37W2.
*1:
This step is required if screen data is saved only in the GP unit, not in any other device.