13
SDHC
FAT32
32GB
When the setting of the output destination folder is set to “CF Card” on GP-Pro EX,
if you change the display unit type, the setting will automatically change to the one
that uses a SD card. To change the setting of the output destination folder, see [
Changing the setting of the external media to use
.
2.5.3 USB Interface
GP-3310T has two USB ports (USB Type A) but GP-4401WW has only one.
If devices are connected to both USB ports on GP-3310T, use an USB hub for
GP-4401WW. Because of bus power limit on GP-4401WW USB port, it’s
recommended to use an USB hub supporting self-power supply and be sure to
check the operation.
Also, several USB devices of the same category in the following table cannot be
simultaneously used. Even if multiple USB devices of the same category are
connected to the display unit, only the first USB device recognized by the display
unit can be used.
USB Devices of the same category
Category
USB Device
1
Printer, USB-PIO converter
2
Keyboard, Numeric keys, Barcode reader
3
Mouse
4
USB storage (USB memory, CF/SD card reader, and so on)
5
USB transfer cable
6
USB-Serial (RS-232C) conversion cable, SUB/RS-422/485
Conversion Adapter
2.5.4 Sound Output Interface
GP-4401WW is not equipped with the sound output function. The sound output
function for GP-3310T cannot be used.
