34 / 34
iv.
Click [OK] to confirm the setting.
v.
Click [Project]->[Save] to save changes.
vi.
Check each function that uses the CF card and replace the setting of [SD
Card] with the one of [USB Storage].
NOTE
To check each function setting of GP-Pro EX, refer to GP-Pro EX
Reference Manual.
(2)
Check and change the destination folder setting following the steps below.
i.
Click [Project]->[Information]->[Destination Folder].
ii.
The current setting is displayed.
iii.
After changing it, click [OK] to confirm the setting.
iv.
Click [Project]->[Save] to save changes.