Pro-Elec PEL00946 Скачать руководство пользователя страница 2

2

Please read these instructions carefully before use and retain for future reference.

• 

When using electrical appliances basic safety precautions should always be 

followed.

• 

Check that the voltage indicated on the rating plate corresponds with that of the 

local network before connecting to the mains power supply.

• 

Keep the work light out of the reach of children.

• 

LED lamps are extremely bright. To avoid possible damage to the eyes, do not 

stare into an LED beam.

• 

If the supply cord is damaged, it must be replaced by a qualified engineer in order 

to avoid a hazard.

• 

Ensure that the supply cord is kept away from heat or sharp edges that could 

cause damage.

• 

In use, avoid touching any external surface of the work light, due to the possibility 

of high temperatures.

• 

Do not leave the work light unattended during use.

• 

The work light has a sealed LED lamp and is maintenance free. The LED lamp 

cannot be replaced. When the LED lamp reaches the end of its life, the work light 

will have to be replaced.

• 

This appliance is designed for domestic use only and should not be used for 

industrial purposes.

• 

Do not use in areas where an explosive or chemical atmosphere may exist. 

• 

Do not use in areas where ventilation is restricted.

IMPORTANT SAFETY INFORMATION

• 

To stand the work light upright, hold the base tube frame down onto the ground 

and raise the upright part as far as it will go.

• 

The work light is suitable for both indoor and outdoor use.

• 

Please note however that the mains connector must only be plugged into an 

interior power socket or an IP65 rated outdoor enclosure.

• 

The work light must be positioned so that there is at least 1m between the front of 

the work light and the surface to be illuminated.

• 

Do not use on damp or conductive surfaces such as metal. It should be placed 

away from any flammable materials.

• 

The angle of the light can be adjusted by 

slackening off the two thumb wheels and rotating 

the LED unit to the desired position then re-

tightening the thumb wheels to lock it into place.

USAGE

Thumb wheel

Отзывы: