3
INSTALLATION
•
Remove the three screws securing the front panel and remove it.
•
Loosen the retaining bolts just enough that the mounting bracket can be unhooked
and removed.
•
Offer the mounting bracket up to the wall or ceiling having checked that there is no
hidden cables or pipes where the holes are required to be drilled.
•
Mark the wall using the mounting bracket as a template and drill the wall or ceiling
and fit the wall plugs or suitable alternatives as required.
•
Secure the mounting bracket to the wall or ceiling using the screws supplied or if
not suitable for your particular installation, use suitable alternative fixings.
•
Hang the air curtain heater on to the mounting bracket so the bolts previously
loosened are located back into the slots in the bracket, ensuring the serrated
washer is located inboard of the bracket.
•
Adjust the angle of the air curtain as required and tighten the bolts to secure the air
curtain in place. Do not over tighten the bolts.
•
Refit the front panel and secure with the three screws.
•
Switch off the mains supply before connecting the wiring as follows:-
Live - Brown or red
Neutral - Blue or black
Earth - Green and yellow or green
•
If you are connecting to a fused spur, a 13A fuse should be used.
•
Restore the power supply.
Washer
Bolt
Mounting point
