Pro-dig Intelli-Tork, Руководство пользователя

Страница: 5 / 16

WWW.PRO-DIG-USA.COM
785.856.2661
5
4.0 CONNECTION GUIDE
Once you have switched on your PRO-DIG
®
Intelli-Tork by pressing the on/off switch on the front of the
transmitter please wait 10 seconds for the transmitter configuration to take place.
You’ll notice a
green
flashing LED, which signifies that the transmitter is on, and also a flashing
orange
LED to sig-
nify that the transmitter configuration has taken place successfully.
It is then essential that the PRO-DIG
®
Intelli-Tork
©
is held vertically (within 5° or so) and that 3 full and slow
rotations are completed . This allows for self-calibration of the rotational count and RPM functions.
This must
be done each time that the PRO-DIG
®
Intelli-Tork
©
is switched on.
To connect to the WiFi enabled PRO-DIG
®
Intelli-Tork© torque sensor please choose the wireless network, from your
device, which corresponds to the serial number of your Intelli-Tork
©
by accessing the list of wireless networks avail-
able in Settings. Please ensure that you are in close proximity to the PRO-DIG
®
Intelli-Tork
©
when you do this.
Your PRO-DIG
®
Intelli-Tork
©
wireless network name (SSID) will appear in the list of available wireless networks and
will be as per follows,
Pro-dig-Intell-XXXXXX