Rev. 5-14-20
Using three people (one at each hex cap screw) carefully lift the green-screen assembly
up to the angled mounting brackets and drop the three bolts through the holes in the
mounting brackets. Make sure that you do not fold or crease the Virtual Green® Pro
Matte® material during this step.
Attach a 1/2”- 13 hex nut to the bottoms of the three hex cap screws. Finger tight is
OK.
Finish tightening the 3/8” x 1-3/4” lag screws into the wood block(s) using a 9/16”
flat or combination wrench.
