Federal Communications Commission Notice
Battery Disposal
Contacting Pro Control
Limited Warranty
In the interest of recycling, please do not dispose of these batteries in the household
waste at the end of their useful life. Instead, dispose of them at an appropriate
collection site. Rechargeable Lithium batteries can explode, catch fire, and/or
cause burns if disassembled, punctured, cut, crushed, short circuited, incinerated,
recharged, or exposed to water, fire, or high temperatures. DO NOT place loose batteries in
a pocket, purse, or other receptacle containing metal objects, mix with used or other battery
types, or store with hazardous or combustible materials. If batteries catch fire, DO NOT
attempt to put out the fire with water—use a class “D” fire extinguisher or other smothering
agent. Keep batteries away from children. DO NOT tamper with wires or connectors that
are attached to the battery. Failure to follow these directions could result in damage to your
remote control that may not be covered by Pro Control’s warranty. Store lithium batteries in a
cool, dry, ventilated area. Follow applicable laws and regulations for transport, shipping, and
disposal. For more details on recycling lithium batteries please contact a government recycling
agency, your waste disposal service, the reseller where the batteries were purchased, or visit
a reputable online recycling source such as:
www.batteryrecycling.com.
Li-Ion
Safety Suggestions
Pro Control warrants its products for a period of one (1) year (90 days only for included
battery packs); or for a period of time compliant with local laws when applicable from the
date of purchase from Pro Control or an authorized Pro Control distributor.
This warranty may be enforced by the original purchaser and subsequent owners during
the warranty period, so long as the original dated sales receipt or other proof of warranty
coverage is presented when warranty service is required.
Except as specified below, this warranty covers all defects in material and workmanship in
this product. The following are not covered by the warranty:
Damage resulting from:
1.
Accident, misuse, abuse, or neglect.
2.
Failure to follow instructions contained in this Guide.
3.
Repair or attempted repair by anyone other than Pro Control.
4.
Failure to perform recommended periodic maintenance.
5.
Causes other than product defects, including lack of skill, competence or experience
of user.
6.
Shipment of this product (claims must be made to the carrier).
7.
Being altered or which the serial number has been defaced, modified or removed.
Pro Control is a division of Remote Technologies Inc. For information on how to become a
trained and authorized Pro Control Dealer, access to the Pro Control Studio programming
software, product information and more, please visit our web site at:
www.procontrol.com
For general information, you can contact Pro Control at:
Pro Control
5775 12th Ave. E Suite 180
Shakopee, MN 55379
Tel. (952) 224-5024
Fax (952) 253-3131
Sales
952-224-5010
Email: [email protected]
Customer Service
952-224-5020
Email: [email protected]
Technical Support
952-224-5024
Email: [email protected]
The Declaration of Conformity for this product can be found on the Pro Control website at:
www.procontrol.com
This equipment has been tested and found to comply with the limits for a Class B digital
device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable
protection against harmful interference in a residential installation. Any changes or
modifications not expressly approved by the party responsible for compliance could void the
user’s authority to operate the device.
This equipment generates, uses, and can radiate radio frequency energy and, if not installed
and used in accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not occur in a particular
installation.
If this equipment does cause harmful interference to radio or television reception, which can
be determined by turning the equipment off and on, the user is encouraged to try to correct
the interference by one or more of the following measures:
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and the receiver.
Connect the equipment into an outlet on a circuit different from that to which the
receiver is connected.
Consult the dealer or an experienced radio/TV technician for help.
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two
conditions:
1. This device may not cause harmful interference.
2. This device must accept any interference received including interference that may cause
undesired operation.
FCC ID: MMURTI1700
IC (Canada): 3166A-RTI1700
N27917
Programmable “Soft Buttons” Allow
Custom Touchscreen Labeling
LCD Touchscreen
(240w X 320h)
Programmable “Hard Buttons” for Tactile
Control of Commonly Used Functions
IR Emitters and
IR Learning Photodiode
Charging LED
Micro USB Port
Pro24.r
(v2)
Quick Reference Guide
Read and Follow Instructions.
Read all safety and operating instructions before operating
the unit.
Retain Instructions.
Keep the safety and operating instructions for future reference.
Heed Warnings.
Adhere to all warnings on the unit and in the operating instructions.
Heat.
Keep the unit away from heat sources such as radiators, heat registers, stoves, etc.,
including amplifiers that produce heat.
Do Not Open Battery Compartment.
This device contains Lithium-Ion or Lithium-Polymer
batteries. Batteries should only be replaced by an authorized service center or trained
installer.
Power Sources.
Connect the unit only to a power supply of the type described in the
operating instructions, or as marked on the unit.
Power Cord Protection.
Route power supply cords so that they are not likely to be walked
on or pinched by items placed on or against them, paying particular attention to the cord
plugs at power receptacles and at the point at which they exit from the unit.
Water and Moisture.
Do not use the unit near water—for example, near a sink, in a wet
basement, near a swimming pool, near an open window, etc.
Object and Liquid Entry.
Do not allow objects to fall or liquids to be spilled into the
enclosure through openings.
Cleaning.
Clean only with a dry cloth.
Servicing.
Do not attempt any service beyond that described in the operating instructions.
Refer all other service needs to qualified service personnel.
Damage Requiring Service.
The unit should be serviced by qualified service personnel
when:
Objects have fallen or liquid has been spilled into the unit.
The power supply cord or the plug has been damaged.
The unit does not appear to operate normally or exhibits a marked change in
performance.
The unit has been dropped or the enclosure has been damaged.
71-500002-15 V1.1
Get more control
®
®
Service & Support
If you are encountering any problems or have a question about your Pro Control product,
please contact Pro Control Technical Support for assistance (see the Contacting Pro Control
section of this guide for details).
Pro Control provides technical support by telephone or e-mail. For the highest quality
service, please have the following information ready, or provide it in your e-mail.
• Your Name
• Company Name
• Telephone Number
• E-mail Address
• Product model and serial number (if applicable)
If you are having a problem with hardware, please note the equipment in your system, a
description of the problem, and any troubleshooting you have already tried.
If you are having a problem with software, please note what version you have installed,
the operating system on your PC, a description of the problem, and any troubleshooting
you have already tried. If you are calling about a software or programming question or
problem, please be at you computer when you place your call. This will considerably speed
up the troubleshooting process.
Please do not return products to Pro Control without return authorization.
Pro24.r
(v2)
Quick Reference Guide
P R O C O N T R O L
To make logo scale correctly
select the logo and go to:
Object>Transform>Scale>Option
s. Then check “Scale strokes and
effects” and click OK.
To make the logo permanently
scaleable on any computer select
the logo and go to:
Object>Expand. Check all avail-
able boxes and click OK.
P R O C O N T R O L
To make logo scale correctly
select the logo and go to:
Object>Transform>Scale>Option
s. Then check “Scale strokes and
effects” and click OK.
To make the logo permanently
scaleable on any computer select
the logo and go to:
Object>Expand. Check all avail-
able boxes and click OK.
Copyright © 2013 • Pro Control Incorporated • All rights reserved.
