8
30% RED LED BLINKING ..................................................................NO BATTERY DETECTED
This indication occurs whenever the charger circuitry cannot detect a battery. The charger circuitry will not allow charge current to
flow under this condition. With the AC power supply cord unplugged, check the connection to the batteries for proper polarity (black
wire to negative or -). Also check for corrosion free secure connections to the battery.
30 & 60% RED LEDS BLINKING ………………..…..…FORMING STAGE TIMEOUT SHUTDOWN
This indication occurs if the battery voltage has not risen above 1.75 volts per cell within the first 3 hours of charging. This
indicates that a possible battery problem exists and that the charge cycle has been terminated at this point.
30, 60 & 90% RED LEDS BLINKING............................................OVERALL TIMER SHUTDOWN
This indication occurs if the charger has not completed the charge cycle within the allowable factory set time period. This
indicates that a possible battery problem exists and that the charge cycle has been terminated at this point.
30 & 90% RED LEDS BLINKING …..…..............................INTERNAL OVERTEMP SHUTDOWN
This indication occurs if the charger circuitry has detected operating temperatures inside the charger enclosure that are above factory
specified levels. This could indicate that a possible charger problem exists and that the charge cycle has been terminated.
30% RED & 100% GREEN LEDS BLINKING …..….......................... BULK STAGE SHUTDOWN
This indication occurs if the battery voltage does not rise properly during the Bulk Stage. This indicates that a possible battery problem
exists and that the charge cycle has been terminated at this point. Please call technical support for further assistance (615.471.5300).
Note: Disconnecting and reconnecting the AC power supply cord will reset the charger.
LIMITED WARRANTY
Pro Charging Systems, LLC (PCS) makes this Limited Warranty only to the original retail purchaser.
PCS warrants this battery charger for 18 months (including part numbers with the RM designation*) from the date of retail
purchase against defec
tive materials and/or workmanship. CR designation refers to “Certified Reconditioned” and designates a 1
year warranty.
If such defects should occur, this unit will either be repaired or replaced at the discretion of the manufacturer. It is the
responsibility of the original purchaser to return the charger along with proof of purchase, transportation, and/or any mailing or
handling charges prepaid to the manufacturer or its authorized representative. Chargers that are purchased more than two years
beyond the date of production will automatically have a warranty start date that will be the two year anniversary of the production
date.
This limited warranty is void if the product is misused, improperly maintained, handled carelessly or incorrectly operated.
Additionally, this warranty is void if the charger is disassembled, the charger’s charge cables are cut, the power cord is cut off, the
charger is altered without authorization from PCS, the serial number is removed, or repair is attempted by anyone other than an
authorized representative.
PCS makes no other warranty other than this limited warranty and expressly excludes any implied warranty, including warranty for
any incidental or consequential damages. This is the only expressed limited 18 month warranty authorized by PCS and does not
authorize anyone to assume or make any other obligation towards the product other than this 18 month Limited Warranty. Some
states do not allow limitation of incidental or consequential damages.
This warranty gives you specific legal rights and you may also have other rights which vary from state to state.
Please call Pro Charging Systems, LLC for full warranty information and/or service please call (615.471.5300).
*
RM suffix refers to “Restricted Markets” such as Rental applications and Heavy Industrial applications.
