www.probuilttools.com
10
DIGITAL ON-SCREEN FOOTAGE COUNTER
Models: PB2000, PB-Mycro, PB2400ES, PB3600ES
Your installed Digital On-Screen Footage Counter will display on the screen as follows:
The control panel for the Digital On-Screen Footage Counter is on the l
eft
half of your main controller:
The controls are as follows:
1)
Reset – Will reset the on-screen footage count to 000.0
2)
Hide Name – Will toggle the display of the name/phone number at the bo
tt
om-center of the
screen on/o
ff
(if pre-programmed)
3)
Hide Display – Will toggle the
entir
e text overlay (date,
ti
me, count, name) on/o
ff
the screen
4)
Set/Move – Use to set the date/
ti
me
5)
Increment – Use to set the date/
ti
me
How to set the date/
ti
me:
1)
Hold down the “Set/Move” bu
tt
on for approximately 7 seconds un
til
“Set Month” appears on
the screen
2)
Press the “Increment” bu
tt
on to raise the value of the high-lighted
fiel
d +1
3)
Press the “Set/Move” bu
tt
on to move to the next
fie
ld, in this order: Month, Date, Years, Hours,
Minutes, Seconds, Hour Mode
a)
Hour Mode – Allows for 12 hour clock (AM/PM) or 24 hour clock
b)
Seconds – Pressing the “Increment” bu
tt
on while on “Seconds” will reset to zero seconds
c)
Pressing the “Set/Move” bu
tt
on a
ft
er the “Hour Mode”
fi
eld will remove you from
programming mode.
Содержание PB-Mycro
Страница 2: ...3 ...
