User Manual
PA speakers »
HD62T - HD63T
WARNING! Before carrying out any operations with the unit, carefully read this instruction manual and keep it with cure for future
reference. It contains important information about the installation, usage and maintenance of the unit.
The information provided in this manual has been carefully checked. However Music & Lights is not responsible for any possible inaccuracy.
Design and specifications are subject to change without notice.
For further information, please contact our Service Center: tel. +39 0771 72190 fax +39 0771 721955 - [email protected]
Rev004 - 03/16 ©2016 Music & Lights S.r.l. - Italy - www.musiclights.it
GB
GENERAL INFORMATION
Shipments and claims
The goods are sold “ex works” and always travel at the risk and danger of the distributor.
Eventual damage will have to be claimed to the freight forwarder. Any claim for broken packs will have to be forwarded within 8 days from the reception of the goods.
Warranty and returns
The guarantee covers the fixture in compliance with existing regulations. You can find the full version of the “General Guarantee Conditions” on our web site www.musiclights.
it. Please remember to register the piece of equipment soon after you purchase it, logging on www.musiclights.it. The product can be also registered filling in and sending
the form available on your guarantee certificate. For all purposes, the validity of the guarantee is endorsed solely on presentation of the guarantee certificate. Music & Lights
will verify the validity of the claim through examination of the defect in relation to proper use and the actual validity of the guarantee. Music & Lights will eventually provide
replacement or repair of the products declining, however, any obligation of compensation for direct or indirect damage resulting from faultiness.
Cleaning the unit and maintenance
• Make sure the area below the installation place is free from unwanted persons during setup.
• All screws used for installing the device and any of its parts should be tightly fastened and should not be corroded.
• Housings, fixations and installation spots (ceiling, suspensions) should be totally free from any deformation.
• For cleaning only use a soft cloth, dry or slightly damp; never use chemicals or aggressive detergents.
General Instructions
• The products referred to in this manual conform to the European Community Directives and are therefore marked with . • During operation, there is a hazard of contact
with a voltage of up to 100 V~ at the terminals. Never make any modification on the unit not described in this instruction manual, otherwise you will risk an electric shock. •
The connection to the main network of electric distribution must be carried out by a qualified electrical installer. Check that the main frequency and voltage correspond to
those for which the unit is designed as given on the electrical data label. • Never use the fixture under the following conditions: - in places subject to vibrations or bumps; -
near sources of heat. • Make certain that no inflammable liquids, water or metal objects enter the fixture. • Do not dismantle or modify the fixture. • All work must always be
carried out by qualified technical personnel. Contact the nearest sales point for an inspection or contact the manufacturer directly. • If the unit is to be put out of operation
definitively, take it to a local recycling plant for a disposal which is not harmful to the environment.
Warnings and installation precautions
• This product in combination with amplifier, may be capable of producing dangerous sound levels that could cause permanent hearing loss. Do not operate for a long period
of time at high volume level or at a level that is uncomfortable. • If this device will be operated in any way different to the one described in this manual, it may suffer damages
and the guarantee becomes void. Furthermore, any other operation may lead to dangers like short circuit, burns, electric shock, ect. • The maximum achievable volume
gain depends on the acoustical environment and positioning of the units. • Before starting any maintenance work or cleaning the unit, cut off power from the main supply.
Technical specifications
Compact horn speaker, with driver, high directivity and efficiency for intelligible speech reproduction and
background music.
• It can work under 8 Ohm or under constant tension thanks to the built-in line transformer.
• Hi-pass filter for protecting driver against out-of-range low-frequ.
• IP66 construction for indoor-outdoor environmental temperatures between -25°C to 70°C.
• Body in UV-stabilized ABS, white color.
• Steel fixing base included.
Installation
1.
Tightly screw the speaker with the mounting bracket at a suitable place. To adjust the speaker, release the
locking nuts of the bracket, move the speaker accordingly, and tightener the nuts.
2.
If the PA system is switched on, first switch it off completely before connecting it.
3.
Connect the Pa amplifier to the appropriate cores, set the impedance (8 Ohm) or the power ( LINE
70/100V) by using the selector.
4.
With the connection of several speakers observe that all speakers are polarized in the same way (black
core = negative pole).
Description
This speaker is designed for PA systems operating with a 100V or 8 Ohm technique. Due to the weatherproof housing (IP66) it is also suitable for outdoor
applications.
TECHNICAL DATA
HD62T
HD63T
Type
Rectangular, with driver unit and transformer
Rectangular, with driver unit and transformer
Nominal/maximum power
15 W
30 W
Speaker Impedance
8 Ohm
8 Ohm
Constant voltage (100 / 70V)
15 / 7.5 W
30 / 15 W
Frequency response
275÷7.000 Hz
250÷10.000 Hz
Sensitivity
106 dB (1W/1m)
108 dB (1W/1m)
Maximum sound pressure
113 dB
122 dB
Protection level
IP66
IP66
Dimensions (WxHxD)
222x166x232 mm
285x280x227 mm
Weight
1.36 kg
1.8 kg
Fig.1
