For further information on RZR Door Installations and Warnings please visit our website
WW W.PR OARM OR.C OM
or
Contact customer service at
1-888-31-ARMOR
TIP: LOOSELY TIGHTEN THE CLAMPS ON THE QUARTER PANEL ON
SOFT FLOOR SO IT DOES NOT SCRATCH AND WILL MAKE THE IN-
STALL EASIER
7.
Use two(2) clamp bracket assemblies for each quarter panel
Loosely install the clamps on the quarter panel like shown on the
figure to the right
8.
After loosely installing the clamps to the quarter panel, you can
set it in place on the outside of the quarter panel tubes like shown
on the figure to the left
9.
The panel should fit with all edges running parallel to the tubes
that they are being mounted to Once the gaps are good you can
fully tighten all the bolts
10.
Repeat steps for opposite side
NOTICE: Check all hardware before each us to ensure they are tight
If there are any issues please contact Pro Armor customer service
using the information at the bottom of each page
