Operating instructions
wheel-e
30
In addition to these maintenance tasks/checks
by the user, PRO ACTIV has prescribed
maintenance tasks to be carried out by the
rehabilitation specialist dealer or
PRO ACTIV
for safe operation of the product
and to minimise the risk to the user or third-
parties.
The initial inspection is performed after running
200 kilometres or 5 months after delivery
(whichever comes first). The maintenance
schedule can be found in the inspection lists in
chapter 34.
Subsequent inspections are then always
performed after 1,000 kilometres running or a
period of 1 year after the last inspection
(whichever comes first). The maintenance
schedule can be found in the inspection lists in
chapter 34.
After extreme stresses, such as during
holidays where the product was exposed to
sand, sea water or snow, an additional deep
clean and inspection by your rehabilitation
specialist retailer is recommended.
To maintain the operating licence and the
warranty validity, the performance of the
maintenance tasks must be documented. Any
faults identified during maintenance work must
be rectified and documented as such before
further use of the product.
Even if your product does not show any signs
of wear, damage or malfunctions, the regular
safety-related checks on your product must be
carried out in accordance with the
maintenance schedule.
26.3 Proof of maintenance
To provide proof of the maintenance, you can
use the inspection lists in chapter 34. The
inspection lists are also available as pdf files
which can be filled in within the download area
of
www.proactiv-gmbh.com
under the link
"more documents >>". In any event, keep all
receipts/service reports as a means of proof,
and get any service work which has not been
carried out by the manufacturer documented.
Please bring these operating instructions/
the present service booklet to every
service.
27 Disposal and recycling
At the end of the service life, the product can
be disposed of by PRO ACTIV or your
rehabilitation specialist dealer in a proper,
environmentally-friendly manner.
The disposal or recycling must be carried out
by a waste disposal company or a municipal
waste disposal centre.
Special guidelines may apply on-location with
regard to the disposal or recycling. These must
be clarified and considered when disposing
(this may also include the cleaning or
disinfection of the product before the disposal).
In addition, the special provisions of the local
regulations regarding the disposal of the drive
system and the rechargeable batteries must be
observed.
In the following text, you will find a description
of the materials for the disposal and recycling
of the product and its packaging:
Aluminium:
Frame, rim
Steel:
Fastening points, screws, nuts
Plastic:
Handles, tyres, bags for packing,
rechargeable battery housing
Copper:
Cable and electrical components in
the drive system
Lithium:
Rechargeable battery
Cardboard/paper:
Packaging
28 Re-use
If your product has been provided to you by
your funding provider and you no longer
require it, you should report this fact to your
health insurance company or your
rehabilitation specialist dealer. Your product
can then be simply and economically re-used.
Before any re-use, a safety check must be
carried out on the product by PRO ACTIV. In
addition to the instructions contained in
chapter 25 (Cleaning and care), a thorough
