• The Built-In Compass at top of Lantern is as shown in photograph
Compass Reading Tips
• Hold Lantern level. The needle
must be balanced properly for an
accurate directional reading
• Read the correct direction; “N”
stands for “North”
• High Intensity Beam. Extremely bright 300 lumen light
• Do not shine directly into eyes; may cause vision
damage
• Follow City Ordinance Guidelines for proper disposal of
dry cell batteries
• Recommended for Ages 14+
• Remove and store batteries when not in
use for 90 days or longer
• Clean Lantern with a clean, dry cloth
as needed.
• Lubricate screw threads and moving
parts with standard consumer lubricant
as needed
If the Lantern does not turn on; works intermittently; or has a weak light:
• Remove and replace batteries
• Be sure Lantern base is screwed on tightly,
and batteries are inserted properly in
battery compartment
• If problem persists, contact Pro-4 Tactical for
technical advice
• See www.Pro-4Marketing.com for Warranty and
Replacement Information
• Move to a different area if the
compass reading is unstable
• Use common sense: e.g., know that
the sun rises in the East and sets
in the West
WARNING: This product can expose you to chemicals including Benzene and Ethylbenzene which are known to
the State of California to cause cancer. For more information, go to www.p65Warnings.ca.gov
Built-In Compass
Maintenance
Warning
Troubleshooting
Three magnets mounted in base of Lantern provide easy, hands-free
magnetic adhesion to most ferrous (iron-based) metal surfaces.
Magnetic base is most effective on a flat metal surface.
Retractable hook on bottom of Lantern base
Retractable handles on side of Lantern. Use to hang Lantern in ideal
location for maximum light
FRESH ALKALINE BATTERIES ARE RECOMMENDED
DO NOT MIX OLD AND NEW, OR DIFFERENT TYPES OF BATTERIES
DISPOSE OF BATTERIES PROPERLY
Unscrew and remove battery cover on bottom of Lantern
Insert 3 AA batteries according to polarity (+/-) as indicated
on Lantern battery compartment
Replace and tighten battery cover
1
2
3
To turn Lantern ON, pull top of Lantern UP
from base until unit is fully extended
Adjust height of Lantern to
control amount of light emitted
To turn Lantern OFF, push top
of Lantern DOWN toward
base until unit is fully closed
1
2
3
1
1
2
2
Installing 3 AA Alkaline Batteries
On / Off Instructions
Magnetic Base
Retractable Hanging Hook and Handles
