Pro 2 HDMIMX44RS, Руководство по эксплуатации

Страница: 10 / 11

10
Operating Instruction
IR extender control
User can use the IR receiver cable to change the IR receiver position.
If controlling the HDMI Matrix through the 1/8” (3.5 mm) input jack on the rear panel,
connect the IR cable directly to the matrix rear IR receiver extension sockets.
IR system
1) Control the sources from the sinks
Step1: Connect 4pcs “IR TX” cables to “IR TX” ports; connect 4pcs “IR RX” cables to “IR
RX” ports
Step2: Affix the 4xIR emitter of “IR TX” cables to the IR window of the 4xHDMI source
Step3: Aim the remote control of HDMI source which you choosed to the “IR RX” cable
which connected to the Matrix.
For example:
If you choosed HDMI source1, then just aim the remote control of HDMI source1 to the “IR
RX” cable which connected to the Matrix.
2) Control the HDMI Matrix from “IR RX” port.
Aim the remote of the HDMI Matrix to the “IR RX” cable which connected to the Matrix.