II. Installation and Operation of Receiver:
1.
Connection of Power Input
：
Connect input side of
５Ｖ（ＤＣ）
Power Supply to
power input hole and connect the other side to AC Power Outlet
(Note
：
AC Power spec of POWER SUPPLY must fit with voltage range locally)
2. Connection of Audio Output
：
Connect
ψ
6.3mm Plug with Double Needles to Audio
Output Hole of Receiver(MIC) and connect the other side to Power Amplifier or
other input surfaces of mixer (MIC
IN).
(Note
：
Please connect both sides of
ψ
6.3mm Plug with double needles well, then,
power on Power Amplifier or other machines with audio input, such as mixer. It
is to avoid any temporary sound of contact while in connection between machines
such as Power Amplifier or Mixer and
ψ
6.3mm Plug with double needles)
3.
Power on and activate the projector; blue light is on.
III. Precaution
1. The receiving frequency is best while the antenna is installed at 90 degree vertical
to the ground.
2. The receiver enables with 3 sets of wireless microphone system, but need to follow
with dealer’s instruction of systems without interferences.
3. To avoid frequency interferences, please place it away from microwave and WIFI
Host.
4. Do not use and store it in thermal, humid places with dust and place it apart from
child below 3.
5. Do not drop it down and collide by force to avoid damages of interior circuit board.
6. If it is dirt, wipe it with soft cloth; organic solvent classified as chemical product is
prohibited.
