Care and maintenance Page EN-25
The hygiene filter should be
cleaned every time the dust bag
is changed.
If odours cannot be removed by
cleaning or the filter is too heavily
soiled, it must be replaced.
1. Pull the mains plug (12) out of
the socket.
(29)
(13)
2. Slide the lock (29) to the left in
order to unlock the filter cov-
er (13).
(13)
3. Remove the filter cover.
(28)
(30)
4. Remove the hygiene filter (28).
To do this, press the tab (30)
downwards and pull the hy-
giene filter out towards the
front.
5. Rinse the hygiene filter with
clean water only, then shake
out the water and/or clean it
with compressed air. Never
use detergent or washing-up
liquid to clean the hygiene fil-
ter.
6. Allow the hygiene filter to dry
out
completely
.
7. Reinsert the hygiene filter and
the filter cover.
The article numbers for re-
ordering motor protection fil-
ters and hygiene filters are listed in
chapter "Service" on page EN-30.
