Prismatibro Prisma DI-5C, Руководство пользователя

Страница: 8 / 12

2:10 READ DOCUMENTS
This menu enables you to check previous measurement values.
Follow section 2:8 until READ DOC is displayed, press OK.
Select the cylinders you wish to check using < or > buttons
When all positions are checked the display will ask NEXT CYLINDER?
When all cylinders have been viewed the display will ask READ DOC DONE, press OK.
The display will now ask FIND OTHER DOCUMENTS.
Should you want to return to base, use right > arrow key for RETURN TO BASE, press OK.
2:11 DELETE DOCUMENTS
This menu provides two options; delete a single document or, delete all documents.
Delete single document:
Follow section 2:8 above until DELETE DOC is displayed, press OK.
The display will read ARE YOU SURE, NO ? If ‘NO’ press OK, the display will move to
FIND OTHER DOCUMENTS. If arrow right > is pressed the display shows ARE YOU SURE,
YES ? If ‘YES’, press OK.
Display will now show DOCUMENT DELETED and return to FIND STORED DOCUMENTS.
Delete all stored documents:
To delete all documents you should follow the procedure below;
•
Start the instrument by pressing OK, accept date/time with OK.
•
Pressing the right > arrow twice the display will move to
DELETE ALL DOCUMENTS, press OK. The display will read ARE YOU SURE NO ?.
If ‘no’ press OK, otherwise press right > arrow button to menu ARE YOU SURE, YES?,
press OK to delete all documents.
The program will returns to menu NEW DOCUMENT status.
We recommend you consult the flow scheme in section 5. This will greatly assist in
understanding the sequence of events.
2:12 BATTERY CHARGE
When the power of the battery goes low, a battery indicator will indicate low battery
level in the left side of the display.
A built-in protection circuit will switch off the instrument automatically when the
voltage reach 3,2V to protect the battery from being totally discharged.
Charge the battery with the charger until the led indicator of the charger
switches from red to green light.
3. DATA TRANSFER TO PC
All data stored in the DI-5C can be transfered to a PC. The software and USB cable
included with the instrument has been developed to make the operation as simple as
possible.
It is also possible to connect the instrument directly to a PC while taking measurements
from the engine. Pressing OK while measuring values A - E will automatically transfer
the measuring data to the PC program.
NOTE Remember to save the measurement data as a file in your PC.
See the separate “Prisma DI-5C Software Installation Manual”