3
OPTION 1
When the unit is mounted directly onto
the mast access panel from the rear.
1. Remove mast access panel from the pole.
2. Thread the cable
E
through the panel.
3. Screw the unit onto the panel from the rear
of the panel, using M6 screws.
4. Connect the cable
E
to the mast terminals.
5. Refit the mast access panel with the unit mounted.
6. Test signal.
7. Remove the top cover
B
together with the
LED light ring
C
, turn out the service hook
D
and place the lid on the service hook during
installation – see picture below hole pattern.
8. Install relief symbols
J
.
9. Install the top cover and the LED light ring.
10. Fasten the tactile direction arrow
A
in correct
walking direction (p. 6).
TECHNIC
AL
SUPPORT
·
+46 504 400 40 · suppor
t@pr
isma
tibr
o.se
M6
M6
Ø 7mm
Ø 7mm
Ø 4mm
Ø 4mm
Ø 13mm
HOLE PATTERN
Upon request a real size hole pattern sticker
Z
can be provided along with the ordered products.
Fasten the hole pattern on the pole and drill the holes.
Z
OPTION 2
When it is impossible to install the
screws from the rear.
1. Remove the top cover
B
and the LED light
ring
C
, turn out the service hook
D
and place
the cover on the service hook during installation
– see picture below hole pattern.
2. Disconnect the cable connectors from the
electronic module
G
.
3. Slide out the electronic module
G
and front
I
.
4. Push the LED protection lens
M
up.
The mounting holes are now accessible.
5. Thread the cable
E
into the mast.
6. Mount the housing
K
onto the mast.
7. Replace the LED protection lens
M
, slide in
the electronic module
G
and front
I
.
8. Connect the cable
E
to the mast terminals.
9. Test signal.
10. Install relief symbols
J
and tactile direction
arrow
A
(p. 6).
11. Fold back the service hook
D
, install
top cover
B
and LED light ring
C
.
INSTALLATION
[Not ac
tual siz
e]
D
100-170, 150-240 V
T
U
V
•
•
W
X
Q
S
R
18-24 V
T
T
U
U
V
V
•
•
•
•
W
W
X
X
28-49 V
Q
Q
R
S
S
R
S
T
Connection push front
Connection vibrator
Q
R
U
V
W
X
Main connection
Fuse direct supply
Connection NFC module
USB connection
Connection LED light ring
Connection external
push button
•
Not in use
