User Manual - RevEAL Profile Junior – Prism Projection, Inc.
Home Screen
The Home Screen displays the current fixture status including color
temperature, intensity, DMX address, and number of DMX channels in use. The
rotating fan symbol at the top right indicates the fan is working properly.
Menu Screen
The Menu Screen offers four options for control. Select Fixture Address,
Channel Personality, Standalone Control, or TrueSource to advance to the
desired control feature set.
Fixture Address Screen
Use this screen to select either DMX address (1-512) or Art-Net universe (0-0
to 15-15) and to choose either 8 or 16 bit encoding. The screen displays the
fixture IP and MAC address at the bottom.
Channel Personality Screen
Use this screen to select color personality (CCT or Full White), Intensity
(Standard or Linear), Advanced Settings (Eco or Full Power, Algorithm,
Refresh Rate) or Factory Reset. Eco Mode under Advanced Settings puts the
fixture in a low power fan-less state. Light output is reduced by approximately
40%. Set Refresh Rate to Medium for most applications. High is intended for
high frame rate uses. Fixture options will vary depending on model number.
Standalone Control Screen
For operation without DMX or Art-Net in a standalone setting. Use this screen
to adjust the intensity and in some fixture models the CCT value. Powering off
the fixture from this screen will save the last fixture settings including intensity
and color.
TrueSource Screen
This screen displays the CIE value of the color of the light being produced by
the fixture. The screen shows both the target and actual color value in X,Y
coordinate values to assure TrueSource active color calibration is active and
monitoring performance.