Prism Sound MDIO-PTHDX, Руководство по эксплуатации, Страница: 14 / 35

Prism Sound MDIO-Dante Module Operation Manual Revision 1.01
©2019 - 2020 Audio Squadron Limited
14
In order to control devices and to set up routings on the Dante network, you will need a computer attached to
the network via its network port, and for it to be running the Dante Controller software….
Dante Controller
Dante Controller is a free software application for PC and Mac which allows you to configure the Dante
network, to view and control the various settings of the devices on the Dante network and to make routings
between individual units.
The first thing you will be presented with when starting Dante Controller is its ‘Routing’ tab which displays the
inputs and outputs of every device on your Dante network. By clicking in the appropriate box in this grid, you
can connect a path from one device to another.
Having connected any Atlases and Titans you have to the network, they should automatically appear in both
the Transmitter and Receiver axes of the grid.
You will also require one or more Dante utilities that can connect audio playback/recording software running
on your computer (i.e. your DAW, or iTunes, Windows Media Player etc.etc.) into the Dante network. In this
example I have installed the Dante Virtual Soundcard software (DVS), which acts as an ASIO or Core Audio
driver for the DAW software.
By using the TX and/or RX channels of the DVS driver as the Outputs/Inputs of your DAW you can play and
record to or from audio outputs and inputs that are connected via the Dante Controller routing grid to DVS
ports.
Use the + and – buttons to open/close areas of the grid to see the devices you are concentrating on.