PL5 - Prism Comfort Recline User Guide - Doc 005 Rev 06/2011
© Prism Medical UK 2011
Prism Comfort Recline Sling
Application
The Comfort Recline Sling is designed for ease of fitting and general purpose
transfer. It can be used to transfer from the seated to recumbent position or from
recumbent to seated. This sling is designed to remain in position on the chair
underneath the person and is Ideal when introduction of a sling is difficult
(for example, when hoisting a person who uses a tight fitting chair). It’s space saver
fabric is breathable and stretches to mould into the shape of the chair, ensuring
comfort for the person. Use of this sling is subject to risk assessment and monitoring
of pressure risks.
The person must be assessed by a competent person who must be fully trained in
the suitability, application and fitting of the sling. Carers should always be trained in
the use of hoists and slings.
Sling Inspection
All Prism Slings are manufactured to meet and exceed the requirements of
BS EN 10535:2006 ’Hoists for the transfer of disabled persons – Requirements and
test methods’. Slings should be inspected prior to use and after washing. Damaged
or badly worn slings should be discarded… The label on the sling contains vital
information to identify the sling - if any part of the label becomes illegible, then it
must be removed from service and replaced.
The sling should be visually inspected with regard to the following items:-
•
Any signs of damage (i.e. Cuts, frays, tears, burns) to the sling straps
•
Any signs of stitching becoming undone on any part of the sling
•
Any signs of the fabric being stretched, tearing or undue wear
•
Any signs of discolouring or bleaching on the material
•
Is the sling complete? i.e. all straps present, stiffeners in place - where
applicable, etc
•
Label clearly legible
Compatibility
The issue of sling compatibility with various manufacturers’ hoists has been a
concern for specifiers for a number of years, an issue that is compounded by the
increased number of companies supplying hoists and slings.
Some hoist/sling manufacturers will state that only slings manufactured by them can
be used on their hoists and vice versa. This is their policy only and is
NOT
a legal
requirement. A risk assessment must still be completed even if the same
manufacturer of hoist and sling are to be used, and the specifier simply has to state
that the carry bar is of a similar design and that the sling manufacturer has
authorised its use on it.
A comprehensive list is available separately and your local agent will be able to
provide assistance with compatibility issues.
Maximum Load (Safe Working Load - SWL)
The maximum load for the sling is clearly marked on the label of the sling. The
maximum load will also be displayed on the hoist and any detachable elements of
the hoisting system.
DO NOT exceed the maximum load stated on any of the equipment.
