280400 / 280401 -
A320B
- Owner’s Manual
Rev: 07-2013
Page: 9
Assembly Instructions:
6. Insert the bolts, and plastic white washers into the Arm rest, and then pass through the two holes on Mast
assembly as shown in Figure 6, to 8. Insert other Arm rest into the bolts, and place plastic white washers as
shown in Figure 9, and 10. Tight the nuts using 17 mm wrench as shown in Figure 11. Place the bolt pro-
tector caps on the bolts, and nuts as shown in Figure 12, and 13.
7. Remove the screws from the mounting position of push handle on Mast assembly. Insert the screws
through the push handle bracket, and mount on the Mast assembly as shown in Figure 14, and 15.
Figure 13
Figure 12
Figure 11
Figure 10
Figure 9
Figure 8
Figure 7
Figure 6
Figure 15
Figure 14
