STANDARD LIFTING POLE
HLDW582
6.
Check the strap on the triangle is secure and routed through the buckle correctly
5.
Ensure the lifting pole is pointing towards the centre of the mattress platform and the lugs on the lifting
pole are fully located in the slots on the socket.
7.
Attach the strap to the lifting pole between the 2 locating lugs
LI
FT
ING
PO
LE
Please Note
•
The Lifting Pole safe working load of 80 kg must not be exceeded to prevent damage to the bed fixing and
the attached accessory.
• The normal service life for care beds in domestic use is approximately 5 years. The care bed and
accessories must not be disposed of as normal domestic waste after their service life has expired. To ensure
that it is disposed of in an environmentally compatible way please contact Harvest Healthcare Ltd.
• Only persons who have been trained or are competent should install accessories on a care bed. This also
applies for persons who inspect accessories during routine maintenance.
•
If there is a suspected fault or damage with the fitted accessory, this must be removed or replaced as soon
as the fault has been identified. Clearly mark on the equipment “Faulty Do Not Use” and take it immediately out
of service. Please inform the person in charge without delay.
•
Do not immerse any accessory components in water, only wipe clean with a damp cloth. Only disinfection
by wiping is allowed of the metal parts or the lifting pole handle.
Standard Lifting Pole
Assembled
