PRIS VBT-40 Скачать руководство пользователя страница 5

Страница: 5 / 6

Assembly,

operation,

and maintenance

Function and control elements

1 Pulley with the lever
2 Polyamid-6 pulleys
3 Opening for vice jaws
4 Lever pin
5 Carry handle

Assembly

The bending tool must be secured in
an adequately sized bench vice.

Workbench must be stable enough

to not move while bending is in process.

Secure the tool’s lever with the included pin

to the center pulley.

Operating the bending tool

WARNING!  Workpiece  may  be
sharp. Caution is advised.
Work  gloves  are  required  while

working with the tool.

Securing the workpiece for bending:
-

To lock the tool in place, spread the vice jaws

as wide as possible.
- Insert the bending tool in the vice so that the
jaws  slide  into  the  openings  (3)  and  the
pulleys (2) with the lever (1) point upwards.
-  Insert  the  workpiece  between  the  pair  of
pulleys (2) and the pulley with lever attached
(1). Tighten the vice so that the lever-pulley (1)
presses  the  workpiece  against  the  pair  of
pulleys (2).

Bending:
-

Tighten the bench vice until you feel slight

resistance of the material

–

at about 1 to 2 mm

steps.

- Turn the lever (1) clockwise until the end of
the  workpiece  reaches  the  left  pulley  (2),
then turn the lever (1) counter clockwise until
the  opposite  end  of  the  workpiece  reaches
the right pulley (2).
- Tighten the bench vice.
- Repeat the steps above until you reach the
desired bend radius.
-  The  bending  tool  is  equipped  with  a  ruler
under  the  left  pulley  for  higher  degree  of
repeatability and bend radius tracking.
- You can also watch our instructional video at
-