Prior NanoScan OP400 Скачать руководство пользователя

Страница: 3 / 4

SOfTWARE

The standard customer-facing application for the system is called ‘Nanobench 6000’, and is included on the

USB drive included in the shipment. This also includes software or links to software which must be installed

before the software can be used.



Visual C++ Runtime



Labview Runtime Engine

‘Nanobench 6000’ runs on Windows XP, 7, 8, 10.

Once Nanobench and associated software has been installed and controller functional, go to

Windows Device Manager, and find the COM port that the controller is connected to (e.g. ‘COM12’).

Select the correct COM port within Nanobench 6000, then click ‘Connect’: At this point the

software should connect to the controller and begin reading the live measured position.

www.prior.com

Содержание NanoScan OP400

Страница 1: ...cord set provided with the system for this unit Do not attempt to disassemble the product Doing so will void the warranty This product does not contain consumer serviceable components Service should...

Страница 2: ...h the connected computer Not lit No communications taking place GREEN lit or flashing Communications are taking place IN POS Indicator LED Indicates the status of the stage position in CLOSED loop mod...

Страница 3: ...d Visual C Runtime Labview Runtime Engine Nanobench 6000 runs on Windows XP 7 8 10 Once Nanobench and associated software has been installed and controller functional go to Windows Device Manager and...

Страница 4: ...0 UP QGOP 400 INV QGOP 400UP HL and QGOP 400 INV HL come with stored settings which have been optimized for fast step settle times and objective loads The datasheet provided with your OP400 provides i...