P
LEASE
R
EAD
T
hE
i
NSTRUCTiONS
B
EfORE
A
TTEMPTiNG
T
O
U
SE
T
hE
N
ANO
S
CAN
OP400 S
YSTEM
iDENTifYiNG YOUR SYSTEM COMPONENTS
iNSTALLiNG YOUR SYSTEM
• Save this manual as it contains important safety information and operating instructions.
• Before using the system, please follow and adhere to all warnings, safety and operating instructions located
on the product and in this user manual.
• Do not expose the product to open flames, extreme hot or cold temperatures, water or moisture.
• Do not allow objects to fall on or liquids to spill on the product.
• Connect the AC power cord only to designated power sources as marked on the product.
• Make sure the electrical cord is located so that it will not be subject to damage.
• To reduce the risk of damage, unplug the product from the power source before connecting the components together.
•
DANGER
- never alter the AC cord or plug. If the plug will not fit into the outlet, have a proper outlet installed
by a qualified electrician.
• Use only the proper type of power supply cord set (provided with the system) for this unit.
• Do not attempt to disassemble the product. Doing so will void the warranty. This product does not contain
consumer serviceable components. Service should be performed by authorized service centers.
NANOSCAN OP400 QUiCK START iNSTRUCTiONS
The standard NanoScan OP400
system consists of:
(1) - NanoScan OP400
Piezo Objective Scanner
(1) - NPC-D-6110 Controller
(1) - Microscope Thread Adapter
(1) - 1.3mm (0.05 inch) Hex Key
(1) - Objective Lens Thread Adapter (optional)
(1) - Objective Lens Spacers (optional)
NanoScan OP400 Piezo
Objective Scanner
NPC-D-6110 Controller
www.prior.com
Microscope Thread Adapter
STEP 1:
Select the position for the
OP400 on the nosepiece.
STEP 2:
Insert the microscope thread
adapter.
STEP 3:
Connect the OP400 to the
nosepiece. Tighten with the hex key.
STEP 4:
Insert the objective lens using the appropriate objective lens adapter. Note no
adapter is necessary for M32. Other objectives can be inserted into the nose piece using
option parfocal spacers.
STEP 5:
The OP400 unit is
now properly installed.
Objective Lens Thread Adapter Parfocal Objective Spacer
Please take care with the cabling.
Under no circumstances use the cabling to hold the stage.
