Instruction manual
PRIO
LITE LED 400
PRIOLITE GmbH Wuerzburg - Last revised: 10/2012 - Page 5
Intended use
.
The LED 400 battery-powered continuous video light is intended for mobile applications in
the context of professional photography as well as film and video, in the studio or on-
location. The LED continuous video light is designed for lighting of photography, film and
video recordings, and must not be used for any other purpose.
Safety instructions
.
LED continuous light units must not be operated without supervision.
Always use extreme caution when handling LED continuous video lights because of the
generation of extreme heat during operation and the resulting risk of burns.
The opening of the casing and repairs on LED devices must be carried out only by
authorized customer service personnel.
Only the provided original
PRIO
LITE charger must be used for charging the batteries.
Before each use, check to ensure that the casing as well as all cables, connectors and
sockets are in good, undamaged condition. Otherwise operation of this device is
forbidden; damaged units and/or cables must be repaired or replaced by authorized
customer service personnel.
It is particularly important to protect LED continuous video lights from moisture, splash
water, and impacts during use or transport. These units are not designed for operation
in dusty environments. LED continuous lights must never be used in potentially
explosive areas; to prevent the risk of fire, do not store flammable materials (e.g.
decorative materials, paper, etc.) in the immediate vicinity of the LED devices.
Do not insert any objects into the ventilation slits or the charging or synchronization
sockets. The ventilation slits must be kept clear during operation.
LED continuous video lights mounted on pantographs, ceiling systems, or extended
stands must be doubly secured against falling down.
Do not point LEDs directly at eyes from short distances (less than 5 meters) as this can
cause injury to the eyes. Do not look directly into the LED array.
