Printronix P5000LJ Series, Руководство программиста

Страница: 98 / 304

98
Chapter 3
Configuring the P-Series Emulation with Control Codes
Plot, Even Dot (P-Series High Density Graphics)
ASCII Code EOT SFCC d
Hex Code 04 SFCC 64
Dec Code 04 SFCC 100
Purpose Prints dots at the even numbered dot columns.
Discussion The even dot plot code is used for programming high density
graphics and must be used in conjunction with the Odd Dot Plot
code (hex 05). Refer to the Plot Mode section in Chapter 6 for
detailed plot mode information.
Example Print two high density plot boxes using odd and even dot plot for
high density graphics. Compare the example below to the
normal density odd dot plot example.
Plot, Odd Dot (P-Series Normal Density Graphics)
ASCII Code ENQ SFCC e
Hex Code 05 SFCC 65
Dec Code 05 SFCC 101
Purpose Prints dots at the odd numbered dot columns.
Discussion This is the P-Series programming normal density graphics
control code. The ENQ code should occur before any printable
data in the data stream. For high density graphics, the Even Dot
Plot code (04 hex) must be used in conjunction with (and
precede) the Odd Dot Plot code. Refer to the P-Series
Compatible Plot mode section in Chapter 6 for detailed plot
mode information.
Example Print two normal density plot boxes using odd dot plot. Compare
the odd dot plot example below to the high density Even Dot Plot
example.