Printronix Auto ID T8204, Руководство пользователя, Страница: 39 / 77

39
appears early enough on the form so that it will pass completely under the scanning beam during normal
printing. This may involve rotating the form or moving the bar code to a different position on the form.
PTX_SETUP Control
There are several PTX_SETUP commands that configure the ODV-2D symbologies and orientations that
will be processed or ignored, including the ability to skip processing entire labels.
PTX_SETUP commands have the following format:
(SFCC)PTX_SETUP
Command
–
Sub Command
;
Value
PTX_END
The SFCC value by default is hex 21 (!) and the entire set of PTX_SETUP commands can be found in the
T8000 Administrator’s Manual. Table 5 lists those commands.
Table 5 PTX_SETUP Commands for ODV-2D
Command Sub-Command Parameter Description
ODV
GRAPHICS
ON or 1
OFF or 0
When enabled, search graphics
within the job for barcodes. Other-
wise, ignore the graphics and only
process the barcode command
from the emulations.
ORIENT
ALL
PICKET
LADDER
Choose the orientations of the
barcodes to process.
SKIP
0 = OFF
1-9999 = #
> 9999 = ON
Skip a certain number of labels from
ODV2D processing. If zero, no la-
bels will be skipped (ignored). If
1-9999, this number of labels will be
skipped. Numbers > 9999 will result
in indefinite skipping of labels.
CODE39
ON or 1
OFF or 0
When enabled, Code 39 barcodes
will be processed. Otherwise, they
will be ignored on the label.
CODE128
ON or 1
OFF or 0
When enabled, Code 128 barcodes
will be processed. Otherwise, they
will be ignored on the label.
INT2/5
ON or 1
OFF or 0
When enabled, Interleaved 2/5
barcodes will be processed. Other-
wise, they will be ignored on the
label.
CODE93
ON or 1
OFF or 0
When enabled, Code 93 barcodes
will be processed. Otherwise, they
will be ignored on the label.