04
To charge the battery:
1.
Connect PBC23 battery charger base, USB cable and adapter,
and plug the adapter to a power outlet
2.
Place PB231 battery on the
charger base with the label
facing up
Charging indicator
Note
The battery is not fully charged at shipment. Charge the battery before use.
Charging time: 1.5 hours using wall socket with the supplied adapter (Charging time may be longer when
charged with PC, other low-power USB port or other adapter)
The printer may print 10 sheets continuously with a fully charged battery*
Always charge the battery with PBC23 battery charger base supplied by HiTi.
Unplug the charger when not in use
Please do not remove the battery until printing is complete, or the printing result may be incomplete or incorrect.
* Under the condition of HiTi laboratory test
Installing consumable
Ribbon
1.
Press the ribbon door latch
2.
Lift the ribbon door
4.
Close the ribbon door
Note
The printing head needs to be heat up in order to perform the intended functions of the product properly.
Therefore it is inevitable that the printing head becomes HOT WHILE PRINTING. DO NOT TOUCH THE
PRINTING HEAD DURING PRINTING PROCESS! DO NOT TOUCH THE PRINTING HEAD RIGHT BEFORE
OR AFTER THE PRINTING PROCESS! Touching the printing head is likely to cause additional damages to the
product, other than jeopardizing the product user's, or any other third party's, personal safety.
3.
Insert the ribbon
Charging indicator
Battery status
Action
Yellow
Battery not inserted
Insert the battery
Battery fully charged
Remove the battery
Red
Battery charging
English
Содержание P231
Страница 1: ...www hiti com P231 User s Manual...
