Prinetti IA5007A, Инструкция по эксплуатации

Страница: 10 / 16

10 AFTER SALES SUPPORT
AU
1300 777 137
NZ
0800 824 556 service@unclebills.com.au
Operating Instructions (cont.)
5. Continue to press the TIMER button to increase the programmed time in 0.5 hour
increments until the desired time is achieved to a maximum of 7.5 hours. The LED
indicator panel will display the current programmed time with a combination of
illuminated LEDs.
Example: If 5 hours is selected both the 1 hour and 4 hour LED indicator lights will
be illuminated.
6. Once the programmed time has been exhausted the Fan will automatically
switch off.
7. To cancel the timer at any point press the TIMER button repeatedly, until all timer
LED indicator lights go out.
To use the remote control to program and activate the timer, point the remote control at
the Fan and press the TIMER button and follow the above steps from point 2 onwards.
NOTE: Any changes made to the programmed time while the timer is active will
cause the timer to reset and begin the countdown once more. Changing speed
and breeze modes had no effect on the active timer settings.
Breeze Mode Selection
There are 3 different breeze modes available for selection and are explained below:
Normal Mode - This is the default mode of the Fan. Normal mode can be identified
on the LED indicator panel when the Mode indicator light is illuminated red. When
normal mode is selected the Fan will run continually at a constant speed.
Natural Mode – Alters the Fan speed automatically to mimic natural wind motion.
Natural mode can be identified on the LED indicator panel when the Mode indicator
light is illuminated green.
Sleep Mode - This mode gradually reduces the Fan speed over time to become quieter
and provide softer and slower air flow, ideal for night time use. This mode can be
identified on the LED indicator panel when the Mode indicator is illuminated with both the
green and red lights. The Fan will automatically reduce 1 speed setting every 0.5 hours
until the Fan reaches the low speed setting, where it will continue to operate.
Example: If medium speed is selected when sleep breeze mode is activated, the Fan
will run for 0.5 hours at medium speed then automatically reduce to low speed for an
additional 0.5 hours then continue at low speed.