Princeton PIGGYBACK EZ HITCH, Руководство по установке

Страница: 21 / 40

8
Truck/Trailer 7-Pin Wiring Kit (cont.)
If you have taken the unit off the truck/trailer, reload to check electrical installation.
Install coil plug from your truck/trailer to the receptacle on the left side of the forklift.
The plug can go in only one way to insure proper alignment of the wires as shown in
Figure 15 below.
Table 1 - Wiring Circuits - Trailer with Separate Stop and Turn Lamps
Conductor Wire Color Lamp and Signal Circuits
Wht White Ground return to towing vehicle
Blk Black Clearance, side marker, and identification lamps
Yel Yellow Left-hand turn signal and hazard signal
Red Red Stop lamps and anti wheel lock devices
Grn Green Right-hand turn signal and hazard signal
Brn Brown Tail and license plate lamps
Blu Blue Back-up lamps
Table 2 - Wiring Circuits - Truck with Single Stop and Turn Lamps
Conductor Wire Color Lamp and Signal Circuits
Wht White Ground return to towing vehicle
Blk Black Clearance, side marker, and identification lamps
Yel Yellow Left-hand turn signal, hazard signal, and stop lamp.
Red - Not Used.
Grn Green Right-hand turn signal, hazard signal, and stop lamp.
Brn Brown Tail and license plate lamps
Blu Blue Back-up lamps
Figure 15