manualshive.com logo in svg

Princeton Instruments PhotonMAX System, Руководство пользователя

Поделиться
Скачать
Princeton Instruments PhotonMAX System Скачать руководство пользователя страница 94

94 

PhotonMAX System Manual 

Version 1.B 

 

10.

 

All warranties implied by state law or non-U.S. laws, including the implied 
warranties of merchantability and fitness for a particular purpose, are expressly 
limited to the duration of the limited warranties set forth above. With the exception 
of any warranties implied by state law or non-U.S. laws, as hereby limited, the 
forgoing warranty is exclusive and in lieu of all other warranties, guarantees, 
agreements, and similar obligations of manufacturer or seller with respect to the 
repair or replacement of any parts. In no event shall Princeton Instruments' liability 
exceed the cost of the repair or replacement of the defective product or part. 

11.

 

This limited warranty gives you specific legal rights and you may also have other 
rights that may vary from state to state and from country to country. Some states 
and countries do not allow limitations on how long an implied warranty lasts, 
when an action may be brought, or the exclusion or limitation of incidental or 
consequential damages, so the above provisions may not apply to you. 

12.

 

When contacting us for technical support or service assistance, please refer to the 
Princeton Instruments factory of purchase, contact your authorized Princeton 
Instruments representative or reseller, or visit our technical support page at 

www.piacton.com

. 

Contact Information 

Roper Scientific's manufacturing facility for this product is located at the following 
address: 

Princeton Instruments 
3660 Quakerbridge Road 
Trenton, NJ 08619 (USA) 

Tel: 800.874.9789 / 609.587.9797 
Fax: 609.587.1970 

Customer Support E-mail: 

mailto:[email protected]

 

For immediate support in your area, please call the following locations directly: 

America 

1.877.4.PIACTON (877.474.2286) 

Benelux 

+31 (347) 324989 

France 

+33 (1) 60.86.03.65 

Germany 

+49 (0) 89.660.7793 

Japan 

+81 (3) 5639.2741 

UK & Ireland 

+44 (0) 28.3831.0171 

Otherwise, see our Support web page at 

www.piacton.com

. An up-to-date list of 

addresses and telephone numbers is posted on the 

www.piacton.com/Support

 page. In 

addition, links on this page to support topics allow you to send e-mail based requests to 
the customer support group. 

 

Содержание PhotonMAX System



































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды