Princess 233022, Руководство пользователя

Страница: 8 / 48

8
EN
Congratulations!
You have purchased a Princess product.
Our aim is to provide quality products with
a tasteful design and at an affordable price.
We hope that you will enjoy this product for
many years.
Description (fig. A & B)
Your 233022/233024 Princess water boiler has
been designed for boiling water. The appliance is
not suitable for boiling liquids other than water.
The appliance is suitable for indoor use only.
The appliance is suitable for domestic use only.
1. On/off switch
2. On/off indicator
3. Water boiler
4. Water level indicator
5. Handgrip
6. Lid
7. Base
8. Removable filter
9. Spout
Initial use (fig. A)
Clean the appliance. Refer to the section •
"Cleaning and maintenance".
Clean the accessories. Refer to the section
•
"Cleaning and maintenance".
Before you proceed, we need you to pay
attention to the following notes:
- Before first use, completely fill the water
boiler with water without using the water
for consumption or other purposes.
Fill the water boiler (3) with water up to •
the maximum mark on the water level
indicator (4).
Boil the water. Refer to the section
•
"Boiling water".
Empty the water boiler (3).
•
Use
Boiling water (fig. A & B)
Before you proceed, we need you to pay
attention to the following notes:
- Before filling the water boiler, always
remove the water boiler from the base.
- Only use tap water to fill the water boiler.
- Always make sure that the water level is
between the minimum mark (1.0 litre)
and the maximum mark (1.7 litres) on the
water level indicator. If the water level is
above the maximum mark, the water boiler
will boil over and hot water will spray out.
- Do not remove the water boiler from the
base until the appliance has been switched
off.
Place the appliance on a stable and flat •
surface.
Remove the water boiler (3) from the base
•
(7).
Open the lid (6).
•
Make sure that the removable filter (8) is •
correctly placed in the water boiler (3).
Fill the water boiler (3) with water.
•
Close the lid (6). •
Place the water boiler (3) onto the base (7). •
Insert the mains plug into the wall socket. •
To switch on the appliance, set the on/off •
switch (1) to the "I" position. The on/off
indicator (2) comes on. The appliance starts
to boil the water.
To interrupt the process, set the on/off
•
switch (1) to the "O" position.
If the process is completed, the appliance
•
switches off automatically. The on/off
indicator (2) goes off.
After use, switch off the appliance, remove
•
the mains plug from the wall socket and
wait until the appliance has cooled down.
Cleaning and maintenance
(fig. A & B)
Before you proceed, we need you to pay
attention to the following notes:
- Before cleaning or maintenance, remove
the mains plug from the wall socket and
wait until the appliance has cooled down.
- Do not immerse the appliance in water or
other liquids.
Before you proceed, we would like you to
focus your attention on the following notes: