1
High Pressure
Washer User's
Manual
YL4720C-100B
IMPORTANT SAFETY
INSTRUCTIONS
SAVE THESE INSTRUCTIONS
Please read and comply
with these original instructions prior to
the initial operation of your appliance
and store them for later use or
subsequent owners.
Apart from the notes contained herein
the general safety provisions and rules
for the prevention of accidents of the
legislator must be observed.
Warnings and notes that are attached
on the appliance provide important
notes for the safe operation.
Hazard levels
DANGER
Pointer to immediate danger, if not
avoided, which leads to severe injuries
or death.
WARNING
Pointer to a possibly dangerous
situation, if not avoided, which can lead
to severe injuries or death.
CAUTION
Pointer to a possibly dangerous
situation, if not avoided, which can lead
to minor injuries.
ATTENTION
Pointer to a possibly dangerous
situation, which can lead to property
damage.
Electric components
DANGER
Risk of electric shock.
Never touch the mains plug and the
socket with wet hands.
Check the power cord with mains Plug
for damage prior to every use. Do not
use the machine if a supply cord or
important parts of the machine are
damaged, e.g. safety devices, high
pressure hoses, trigger gun.
All current-conducting parts in the
working area must be protected against
jet water.
The mains plug and the coupling of an
extension cable must be watertight and
must never lie in water. Moreover, the
coupling may never lie on the ground.
The use of cable reels that ensure that
the sockets are at least 60 mm above
the ground is commended.
Make sure that the power cord or
extension cable is not damaged by
running over, pinching, dragging or the
like. Protect the power cords from heat,
oil, and
sharp edges.
Always switch off the mains
disconnecting switch when leaving the
appliance unattended.
WARNING
The appliance may only be connected
to an electric supply that has been
installed by an electrician in
accordance with IEC 60364.
The appliance may only be connected
to alternate current. The voltage must
correspond with the type plate of the
appliance.
