3
HANDLING INSTRUCTIONS
We recommend that two ADULTS work together to initially remove the conversion top from the carton.
1)
Unpacking your conversion top:
Find a clean, level space to unpack and prepare your new conversion top.
Carefully open the carton so that it can be used as your work surface. Remove all parts from the box and verify that you
have all of the following: (12) protective pads,
2)
3)
Applying Protective Pads:
Remove paper liner from the back of protective pad (#2) and apply to underside of top
one by one. You will need to determine the best location for each of the protective pads depending on the size of the table
that you are intending to set your conversion top upon. The location of the pads shown in FIG. 2 below may or may not be
appropriate for your use.
4)
Setting conversion top in place and attaching net and posts:
(Two adults required) Once protective pads have
been applied carefully turn each conversion top half over while it is fully open and gently set on table surface. It is best that
each adult hold both hinged panels as top is set in place to minimize the stress on hinges. When both top are in place and
touching each other slide net posts clips (#3) on tops as shown below. The elastic ends of net (#4) then slide over posts
and you are ready to play.
FIG. 1
X 48
X 2
X 2
X 6
1
1
5
6
7
7
SPORT
S
5
6
FIG. 1A
Attach the Table Tennis Top-A and B(#5 & #6) to the Hinge (#7) using eight Screw (#1) per hinge.
FIG. 2
X 12
2
2
5
5
6
6
FIG. 3
X 2
3
X 1
4
3
4
5
5
6
6
SPORT
S
SPOR
TS
(4) top panels, (1) net and post set,(48) wood screws and (6) hinges.
Содержание PTCT4A
Страница 1: ......
