5
5.
Tighten Cross Tube Nuts and Bolts from previous page at this time.
Detail B
Detail C
3.
Place T-Leg Assembly (from previous step) on table top.
Be
sure that the offset holes in T-Legs are closest to the
table.
See
Detail A.
4.
Attach T-Leg Assembly to Brackets with Bolt (H10) and Locknut (H11)
as shown in
Detail B & Detail C.
Tighten the Locknuts (H11) all the
way but
be careful not to over tighten
as this is a pivot point.
Detail A
T-Leg
Shorter hole distance
Closest to the table
NOTE:
PARTS REQUIRED:
1 - (P1) Table Top Assembly
2 - (H10) M6 X 65mm Bolt
2 - (H11) M6 Nut
TOOLS REQUIRED:
2- 10mm Wrench
1- 12mm Wrench
1- 13mm Wrench
H10
H10
H11
H11
Bottom of Table
