INSTALLATION
1. After you have removed the mixer from the carton,
inspect the unit for signs of damage. If there is
damage to the unit:
z
Notify carrier within 24 hours after delivery.
z
Save carton and packing materials for inspection
purposes.
z
Contact your local dealer or if purchased directly
the Prince Castle Customer Sales Department at
1-800-722-7853 to arrange for a replacement to
be sent.
2. Verify that all parts have been received.
CAUTION:
The stainless steel spindle is
machined. Ground care must be taken so it
will not be damaged. Severe impact and
undue pressure can put the spindle out of
alignment and balance, making it inoper-
able at high speeds. When lifting or mov-
ing the mixer, do not touch the spindle.
3. Using the four holes on the side of the stainless-
steel mixer housing as a template, mark the
surface where mixer is to be mounted. Use the
mounting hardware provided. See figure 1.
4. Plug mixer into
the appropriate
outlet.
See Electrical Specifications.
OPERATION
Your mixer is equipped with an automatic starting
switch which starts the motor when a drink container is
placed in position.
IMPORTANT:
If the container is removed rapidly from
the spindle when the drink is finished, very little of the
drink will adhere to the agitators.
1. Place the product into the cup.
2. Place the cup on to the cup catch bracket and lift
up until the motor turns on. The spindle will run four
seconds then automatically shut off. Release the
cup from the cup catch bracket and remove it from
the mixer.
CLEANING
To clean, simply wipe mixer head with a damp cloth.
CAUTION:
Care must be taken to prevent
water and cleaning material from enter-
ing the motor housing. This will cause
damage to the electrical system.
PROPER MAINTENANCE
Unless the mixer is damaged, it requires very little
maintenance other than cleaning. The spindle shaft
rotates on sealed ball bearings which do not require
lubrication. If the spindle slows down during opera-
tion then the brushes must be replaced.
2
figure 1
