INSTALLATION
1. After you have removed the timer from the carton,
inspect the unit for signs of damage. If there is
damage to the unit:
!
Notify carrier within 24 hours after delivery.
!
Save carton and packing materials for inspection
purposes.
!
Contact your local Prince Castle dealer or, if
purchased directly, the Prince Castle Customer
Sales Department at 1-630-462-8800 to arrange
for a replacement to be sent.
2. Verify that all parts have been received. Mounting
brackets and hardware are provided.
3. To mount the timer, place mounting brackets in de-
sired location. Scribe location of mounting holes,
center punch, and drill holes. Attach timer to mount-
ing brackets placing star washer between bracket and
timer.
DISPLAYS AND INDICATORS
Shows the time for the selected channel
number.
Shows the channel number selected
and in use. (The 740-T2 model does
not have this display.)
Indicates the time value is in
H
ours and
M
inutes.
Indicates that the time value is in
M
inutes and
S
econds.
Located above each channel timer
button, these lights change color
depending on the stage of the count-
down. Green = first 70% of countdown,
Yellow = next 20% countdown,
Red = last 10% of countdown.
CONTROLS
The 740-T2 has 2 channels, the 740-T4
has 4 channels, the 740-T8 has 8
channels and the 740-T12 has 12
channels.
In the program mode, it increases time
values for each channel . In the Run
Mode, it is used in conjunction with logo
button to increase the volume.
In the program mode, it decreases time
values for each channel . In the run
mode, it is used in conjunction with logo
button to decrease the volume.
Activates Program Mode and used to
adjust the alarm sound level.
PROGRAMMING
1. To program, press and hold the
PRINCE CASTLE
logo for six seconds. The
TIME
display changes
from
----
to
Prog
, and a beep will sound.
See figure 1.
2. Select and press the timer channel to be pro-
grammed. The LED indicator for the selected
button will turn yellow and a beep will sound. The
selected channel number will be displayed in the
CHANNEL
display, the current programmed time
for that channel will be displayed in the
TIME
display, and the time value will indicate either
H:M
OR
M:S.
See figure 2.
3. To change the program time for the selected
channel, use the
SCAN/UP Arrow
or the
SCAN/
DOWN Arrow
button.
2
Channel
(Timer)
SCAN/UP
ARROW
SCAN/DOWN
ARROW
PRINCE
CASTLE
Logo
TIME
Display
CHANNEL
Display
H:M
M:S
LED
Indicators
figure 1
P r o g
1 8:00
figure 2
740-517revB
Printed in USA 3/06
©
2006
