Horizontal Infrared Toaster
IRT-SB-NA-1PS
IRT-SB-NA-3PS
IRT-SB-NA-1PS
2
9
IRT-SB-NA-3PS
Remove Control Side Fan
Power off and Unplug the unit
1
WARNING
Failure to disconnect power
from the unit before servicing
could result in severe bodily
injury or death. The ON/OFF
Switch does not disconnect
incoming power to the unit.
Using a Phillips head screwdriver, open the control
side panel. Reference the
Red Arrow
.
2
Remove (2) wires from the Axial fan. Note the position
of the wiring.
3
Remove (4) Phillips Screws and lift straight up on the
fan to remove. Reference the Green Arrows
4
Install the fan and secure using (4) Phillips screws in
the orientation shown. Previously removed in step 4.
5
Install the (2) wires onto the fan.
Brown= Top.
Orange/Black= Bottom
. Previously removed in step 3.
6
Using a Phillips head screwdriver, secure the control
side panel. Previously removed in step 2.
7
# 2
# 4
# 4
# 4
# 4
# 3
References
Plug in unit. Power on and ensure the unit is fully
functional.
8
Re
place
Control Side Fan
Printed in USA
12
/
3
/2020
353
-
56
7
Rev.
B
