Ketchup Dispenser
Model No. 406-AN
Printed in USA 04/2019 © 2019
4
406-505revF-EN
Ordering/Service Information
PRICES
All prices are F.O.B. Prince Castle Service Center
or F.O.B. factory, Carol Stream, Illinois.
All prices are subject to change without notice.
These prices are exclusive of all sales taxes or any
special taxes which may be levied by federal, state,
or city governments.
OUTSIDE THE U.S.
Contact your kitchen equipment supplier or designated
repair facility for parts and service.
NON-SCHEDULED MAINTENANCE
Not applicable.
Cleaning
Empty ketchup from dispenser and discard.
Lift the push rod and spring assembly straight up and
out of the container.
Then remove cylinder from
container
Troubleshooting
Fill dispenser with warm water. Repeatedly press
actuating lever to pump water and flush out dispenser.
Remove
internal
parts from
container by
pushing
down on
lever and
piston push
rod. Slide
lever out of
the
“T”
shaped
hole in
container.
Wash the container and all loose internal parts in a
solution of warm water and detergent.
No need to
separate piston ring and spring from push rod.
Rinse all loose parts and container with running
water.
Sanitize dispenser. Use 1 packet of
Sanitizer (HCS)
to
2-1/2 gallons (8.5 l) of warm water.
Let air dry.
Note: Do not reassemble dispenser until it is ready to
be used the next day.
WHERE AND HOW TO ORDER REPLACEMENT
PARTS
To order replacement parts, look on the back of your
Prince Castle Price List for the name and phone number
of your local Prince Castle Service Center. You may
also call Prince Castle at 1-800-323-2930 (or fax us at
630-462-1460) for the name of your local service center.
PARTS RETURNS
To return parts to your service center for credit, you
must obtain authorization from your center.
Note: All warranty situations should be handled by
your center.
