Primus ARCUS200S-BT, Руководство пользователя

Страница: 8 / 16

8
3.1. Charging the case and earbuds
Note: The case and earphones have internal, non-removable, rechargeable batteries. Do not attempt
to remove the battery as you may damage the device.
1. To charge the case, plug the USB cable into a power source and the Type-C in the case’s port. The
case starts charging automatically.
2. Charging the case battery with the earbuds inside to their full capacity may take up to 2 hours.
3. Charging the battery of the case alone when connected to Type-C port will normally take 1.5 hours.
4. While the earbuds are being charged using the energy stored in case, the LED indicator on each side
lights up momentarily. This process will normally take 1.5 hours to complete its cycle.
5. When fully charged, the LED of the case will change to solid purple. The LED on each earbud will
turn off when charging is complete.
6. The fully charged buds have power for up to 5 hours of playback time, 4 hours of gaming time or
up to 17 hours of standby time.
However, these times may vary depending on the mobile device used, on the usage profile, and on the
calling/ listening habits of each individual user.
7. When the remaining battery power is less than 10%, an audible prompt will be heard to indicate
that the earbuds need to recharge.
3.2. Turning your earphones on or off
1. The earbuds will automatically turn on as soon as they are taken out from the charging case. They
will start synchronizing with each other and pairing at the same time, as well.
2. If you need to turn the earbuds on manually, press and hold both Multifunction control for about 5
seconds. The Power on prompt will be heard alerting of this event.
3. To turn the earbuds off, you can put them back to the charging case and close the lid. Or you can
also hold the Multifunction control on both earbuds for about 5 seconds. The Power off prompt
will be heard upon shutting off.