Portable Power Pack 44Ah
www.companionbrands.com.au
5
Low Voltage Warning: Continued
IMPORTANT: THE POWER PACK MUST NOW
BE RECHARGED
When the Power Pack is stored or not in use and
the voltage decreases to 11.5V, a single beep will
continue every 10 minutes as a first alert warning
to charge the Power Pack.
If the Power Pack is not recharged and the voltage
continues to decrease to 10.5V, the unit will
automatically switch OFF and the Low Voltage
Warning indicator (RED) will commence flashing
with a single beep every 5 seconds for 10 minutes.
The Low Voltage Warning indicator (RED) will then
remain illuminated and the audible beep will stop.
TO MAXIMISE THE PERFORMANCE AND
BATTERY LIFE OF THE POWER PACK FULLY
CHARGE EVERY 3 MONTHS.
Charging the Power Pack:
Using 240V AC and 12V DC adaptor (included)
Simply plug the adaptor into the CHARGE INPUT
on the Power Pack and then connect to 240V
or 12V power supply. The Charging (GREEN)
indicator will illuminate.
The Fully Charged (YELLOW) indicator will
illuminate when the Power Pack voltage is
fully recharged.
Estimated charging time:
Using 240V AC 4A charger: 8-10 hrs.
*Using 12V DC adaptor cable:
Only suitable for Power Pack ’Top Up’
maintenance charge only.
Maintenance
• Check the Power Pack capacity regularly
(minimum once a month) and charge the Power
Pack as required.
• When the low capacity warning occurs, fully
charge the Power Pack immediately before use.
Using solar panel charger via Anderson
input socket:
Insert the Anderson plug from solar panel charger
into the Anderson input socket on the side of the
Power Pack.
IMPORTANT
When using appliances with high current draw,
i.e. portable fridge, it is recommended to use a
solar panel charger in conjunction with the Power
Pack. The solar panel charger should be equipped
with a regulator and the
maximum charging
current output MUST be less than 6A
. Check
the solar panel charger before connection. It is
recommended to use a maximum 80W solar
panel charger.
