Primula Tailor, Руководство пользователя

Страница: 5 / 12

Instruction Manual
5
2.3 Technical Description
Ironing table with heating and suction and blowing.
This unique ironing table can transform itself within 3 minutes. You can have one ironing table with 2
switchable ironing surfaces.
It is ergonomic and runs very silently with a powerful suction and blowing system.
Suitable for workshops, ateliers and domestic use.
Available in models:
TAILOR - Heating and suction
TAILOR S+B - Heating suction and blowing
2.4 Technical Characteristics
Model Tailor Tailor S+B
Working surface (DOB)
Working surface (FL) 110x38cm
115x45cm 110x38cm
115x45cm
Height adjustment 85cm 85cm
Heating power 1kW 1kW
Suction power 0.27HP 0.27HP
Blowing power NO 0.27HP
Power Supply 230V-1ph-50Hz 230V-1ph-50Hz
3. General rules and Warnings
3.1 General rules of using the Ironing Table
For the safe usage of your Ironing Table, please read the following operating instructions carefully, as
listed below:

Install, use and maintain the Ironing Table according to the instructions in this manual.
Otherwise, the manufacturer has no responsibility for the possible failed operation or safety.

Before connecting the power supply, check that the voltage corresponds to the voltage indicated
on the technical specifications.

Connect the machine only to a power supply that meets the minimum required frequency and is
properly grounded. Do not leave the Ironing Table while it is operating and is on power without
supervision.

Use the Ironing Table ONLY for the intended purpose in accordance with the current instruction
manual and only with the accessories that are provided or that are intended for this specific
Ironing Table. The manufacturer is not liable for any damages resulting from misuse or wrong
use of the Ironing Table.

DO NOT touch the power supply with wet hands.

Do not clean the Ironing Table with corrosive or other damaging materials/chemicals.

Never use the Ironing Table to support any other machine or structure.

It is strictly prohibited to do any kind of welding or alterations on the Ironing Table or its
parts.

It is strictly prohibited to remove any protective device/guards.

It is strictly prohibited to intervene in the control units/circuit boards of the Ironing Table.

It is strictly forbidden to do any modification to the technical specifications of the machine
(electrical or mechanical) by third persons.