Primula MOTO DECO 3000, Инструкция по эксплуатации

Страница: 6 / 11


Turn on the main switch (nr.3).

Turn on the working surface heating switch (nr.6).
Set the thermostat (nr.16) to 110°C temperature during the winter and 90°C during the summer.

Turn on the switch (nr.10) of the steam iron and adjust the steam iron thermostat (nr.15) to the
desired temperature.

Turn on the light switch (nr.7)

Use the Program selector switch “Suction – Steam” (nr.4) in order to choose the desired program P1
or P2.
P1: The suction of the table is operated through the steam button (nr.14) of the steam iron.
The suction will work for as long as you have preset the time on the timer (nr.2)
By pressing the steam button (nr.14) the Iron will produce steam for as long as you keep the button
pressed down. Once you release the button (nr.14) the steam will stop.
Quickly click the steam button (nr.14) to activate the ironing table’s suction. It will continue to work
for as long as you have preset it.
P2: The ironing table’s suction system is activated when you press the steam button (nr.14). The
suction of the ironing table works simultaneously with the steam for as long as you press the steam
button (nr.14) of the steam iron. Once you release the steam button (nr.14), the suction operation
will stop and the steam iron will stop producing steam.

Adjust the amount of steam in the steam iron according to the type of fabric, to prevent
condensation of the steam on the working surface. Fine fabrics require a little amount of steam and
thick fabrics require a larger amount of steam.

To automatically move the cover (back and forward) by using the photocells at your feet, please set
the working surface movement switch (nr.5) to position 0 (zero).
For moving the fabric towards you, please put your foot bellow the foot pedal (nr.13) so that the
photocell (nr12) picks up your foot movement.
For moving the fabric away from you, please put your foot above the foot pedal (nr.13) so that the
photocell (nr11) picks up your foot movement.

To move the cover always towards one direction (backward or forward) please set the working
surface movement switch (nr.5) to either position left or right. You activate the movement with your
foot.
OPERATING INSTRUCTION