STEP 2: Drill holes
Use a hammer-action electric drill with a 14 mm bit.
Drill 100mm holes into brick or concrete wall in exact position chosen for wall brackets.
Insert an expansion bolt into the drilled hole.
STEP 3: Attach the brackets
Remove the nut and one of the washers from the expansion bolts that are now on
the walls.
Fit bracket into place over wall bolt. Replace the washer and nut and tighten with
a socket spanner. Ensure the bracket is tight against wall before fitting the awning
as the weight of the awning could pull the brackets out of the wall.
STEP 4: Fitting the awning
Because the awning is heavy, we recommend 2 step ladders and two people.
Lift the awning unit into place on the wall brackets.
Fix the retaining bolts through the wall brackets to secure the awning unit in place.
Fit the nut onto the bolt and tighten.
Check that both the wall bracket and the retaining bolts are tightened securely.
Primrose Awning Installation Instructions
3
Wall
Wall bracket and expansion
bolt
100mm
